Call 08046032059 80% Response Rate

Send Email

AC Controller

Leading Manufacturer of 2 ac controller with lcd dispay., dual ac controller, ac power monitor-3p acpm, telepac ac controller (2ac), aircon ac controller 3ac and ac protector . from Pune.

2 AC Controller With LCD Dispay.

2 AC Controller With LCD Dispay.
  • 2 AC Controller With LCD Dispay.
  • 2 AC Controller With LCD Dispay.
  • 2 AC Controller With LCD Dispay.
  • 2 AC Controller With LCD Dispay.
Get Best Quote
Product Price: Rs 7,000 / PieceGet Best Price

Minimum Order Quantity: 5 Piece

Product Brochure

Product Details:
PhaseTriple Phase
Current30 Amps. At 250 V AC for A/C Contacts
TypeMICROPROCEESER
BrandPROTON
Mounting TypeWall Mount
  • Modbus Compatibility with BMS over RS-485 Electrical Standard
  • Supply: Single phase 230 VAC, 50 Hz.
  • Display: 16 X 2 LCD Display for Status & Faults.
  • Output: 30 Amps. At 250 V AC for A/C Contacts,
  • Alarm O/P: 2 Nos. Alarm contacts @ 7A 250V AC
  • Sensor: NTC Temp. Sensor for room temp (Range 0 - 55???C)
  • Fire Alarm: Fire Alarm input from Fire Panel
  • Indications: 
    1) Healthy indication for controller.
    2) A/C ON indication for each A/C.
    3) Alarm indication 2 no’s: AC Alarm, Fire Alarm. 
  • Dimensions: 330 (W) X 220 (H) X 80 (D)
  • Front Panel:
    1) 16 X 2 LCD display with backlight.
    2) Key keypad for programming.
    3) A/C1 ON indication.
    4) A/C2 ON indication.
    5) Healthy Indication by blinking Green LED.
    6) ALARM indication by Red LED.
    7) FUN,INC,DEC,ENT keys for parameter setting.
  • Sensing:
    1) Inbuilt Voltage sensing for compressor.
    2) Temperature sensing by Accurate Temp. Sensor
    3) Fire Alarm sensing.
  • Terminals :
    1) Separate O/Ps for each Compressor.
    2) Temperature sensor.
    3) Alarm relay o/p.
  • Alarms/ Protections: 
    1) Over Voltage protection set point user settable.
    2) Under Voltage protection set point user settable.
    3) High/low temperature alarm set point user settable.


  • Additional Information:

    • Production Capacity: 25 NOS PER WEEK
    • Delivery Time: 1 WEEK
    Yes! I am InterestedRequest A Callback

    Dual AC Controller

    Dual AC Controller
    • Dual AC Controller
    • Dual AC Controller
    Get Best Quote
    Product Price: Rs 8,000 / UnitGet Best Price

    Minimum Order Quantity: 5 Unit

    Product Brochure

    Product Details:
    Control TypeTime-Proportional
    PhaseSingle Phase
    Number Of Channels2
    Supply Voltage230 v
    Current30 Amps. At 250 V AC for A/C Contacts
    BrandPROTON
    Model No.DAC-1
    Power Consumption30 w
    Voltage220V AC
    MaterialMild Steel
    Usage/Application2AC AC CONTROL
    Display TypeLED
    Mounting TypeWall Mount
    Controller TypeAC
  • Supply Voltage: 230V AC, 50 Hz +/- 15% separate for each A/C.
  • Contact rating: 30 A at 230 V AC for compressor Live Outputs & 5 A at 250 V AC Alarm Potential free outputs(C, N/O)
  • Temperature Sensor: Thermistor sensor NTC 10K @ 25 ???C metal body with clamp. Sensor cable length 2.75 meters.
  • Temperature Sensing Range: 0 - 55???C
  • Resolution: 1 V for voltage, 0.1 A for Current & 0.1 degree C for Temperature.
  • Auto/Controller Bypass Switch is used to bypass the controller i.e. A/C 1 & A/C 2 will remains ON(irrespective of temperature demands) if both switches are in ON condition.
  • Indications :
    a) Supply ON for A/C 1 & A/C 2: Colour: Yellow
    b) Auto Mode for A/C 1 & A/C 2: Colour: Green
    c) Manual Mode for A/C 1 & A/C 2: Colour: Red
    d) A/C 1 & A/C 2 ON: Colour: Green
    e) A/C 1 & A/C 2 Fault: Colour: Red
    f) Room High: Colour: Red
    g) Healthy: Colour: Green
  • Mounting :Wall Mounting


  • Additional Information:

    • Production Capacity: 25 UNITS PER WEEK
    • Delivery Time: 1 WEEK
    Yes! I am InterestedRequest A Callback

    AC Power Monitor-3P ACPM

    AC Power Monitor-3P ACPM
    Get Best Quote
    Product Price: Rs 4,500 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Brochure

    Product Details:
    Model Name/Number3P ACPM
    Usage/ApplicationANY
    Phase3 PHASE
    Application TypeINDUSTRIAL
    Display TypeLCD TYPE
    BrandPROTON
    UsageIndustrial
    • ominal Voltage Input :
      1] Standard Voltage offered 415 V 3Ph AC(R,Y,B,N) Power supply 2] Accuracy Range: 50 – 115 % of nominal voltage.
      3] Burden : < 2.5 VA per phase.
      4] Overload: 1.2x nominal continuous
    • Nominal Input Current : 5 Amp
      1] Accuracy Range for 5 Amps = 120 % nominal.
      2] Burden < 0.5 VA per phase.
      3] Overload 4.0x nominal continuous
      4] Starting current 0.2% of nominal current.
    • Frequency :50 Hz / 60 Hz range (±5 Hz)
    • Measured Parameters :
      1] RMS Voltage (Volt) (R, Y, B Phase) Phase – Neutral measured.
      2] RMS Current (Amps) (R, Y, B Phase) Phase current
      3] Frequency (R, Y, B Phase)
      4] Power Factor (R, Y, B Phase)
      5] Active Power (KVA) (R, Y, B Phase)
      6] Apparent Power (KW) (R, Y, B Phase)
      7] Main’s KWH
      8] DG KWH
      9] DG Run hour
      10] Mains Run hour
    • Protection:
      1] Over Voltage Protection (Settable)
      2] Under Voltage Protection (Settable)
      3] Over Load Protection (Settable)
      4] Under Load Protection (Settable)
      5] Unbalance voltage/current (Settable)
      6] Over Frequency (settable)
      7] Over Frequency (settable)
      8] Total KW Protection. (Settable)
      9] Phase failure protection. (Settable)
    • Auxiliary Power: No External power is required (Draws power from the voltage signal Inputs)
    • Accuracy:
      1] Volt 0.25% ± 1 dgts.
      2] Current 0.25% ± 1 dgts.
      3] Frequency 0.1% Hz ± 1 dgts.
      4] Power Factor 0.25% ± 1 dgts. (for 0.5 Lag – 1.0 - 0.8 Lead)
      5] Active Power 0.5% ± 1 dgts.
      6] Apparent Power 0.25% ± 1 dgts.
      7] Active Energy Class 1.0
    • Communication Output :
      1] Serial port : RS 485
      2] Baud rate : Selectable 1200, 2400, 4800, 9600, 19200. (Default: 9600)
      3] Unit No : 1-32 (Default 1)
      4] Start bit : 1
      5] Stop bit : 1
      6] Protocol : MODBUS - RTU
    • Environmental :
      1] Working Temp : 0 to 55º C
      2] Storage Temp : 10 to 70º C
      3] Relative humidity : 0 – 95 % non-condensive
      4] Warm up time : 30 Sec
    • Enclosure :
      1] Mounting : Panel mounting.
      2] Position : Panel.
      3] Enclosure : 96 X 96 X 110 mm.
      4] Terminal : Screw ON Terminals.


    Additional Information:

    • Production Capacity: 20 NOS PER WEEK
    • Delivery Time: 1 WEEK
    Yes! I am InterestedRequest A Callback

    Telepac AC Controller (2AC)

    Telepac AC Controller (2AC)
    Get Best Quote
    Product Price: Rs 15,000 / UnitGet Best Price

    Product Brochure

    Product Details:
    Usage/ApplicationSERVER ROOMS , ATM MACHINE
    Voltage400V
    Current30 AMP
    BrandProton
    Country of OriginMade in India
  • Supply Voltage:
    230 VAC ± 15 % for Single Phase 415 VAC ± 15% for Three Phase Separate power supplies for each AC & independent Outputs for Fan & Compressor
  • Output Contact RatingPer A/C :
    1] Single Phase : a] 25 Amps. at 230 VAC for Compressor Output
    b] 7Amps. at 230V AC for fan & alarm outputs.
    2] Three Phase : a] 9 Amps. at 230 VAC 3 Phase Contactor for Compressor Output
    b] 7Amps. at 230V AC for fan & alarm outputs.
  • Front Panel : .
    1) 16 char X 2 lines LCD display with backlit.
    2) 4 Key keypad for programming.
    3) Power indication for each AC.
    4) AC ON indication for each AC
    5) Controller Healthy Indication by Blinking Green LED
    6) ALARM indication by Red LED.
  • Sensing :
    1) Inbuilt Voltage & Current sensing in Power supply unit for compressor.
    2) Temperature Sensing by accurate Temp.sensor. 3) Fire Input Sensing
    4) DG Mode Sensing
  • Terminals : .
    1) Power unit for each AC, separate o/ps for 2 Fans &2 Compressors.
    2) Temperature sensor.
    3) AC1 fail alarm relay o/p.
    4) AC2 fail alarm relay o/p.
    5) Power fail alarm relay o/p
  • Alarms/ Protections : 1) Over voltage protection set point user settable.
    2) Under voltage protection set point user settable.
    3) Over load protection set point user settable.
    4) Under load protection set point user settable.
    5) Automatic cut off for smoke/Fire.
    6) High/low temperature alarm set point user selectable.
  • Power Supply unit : for 3PN & 1 Ph Supply
  • Dimensions : .
    1) Controller : 245 mm X 150 mm X 60 mm
    2)Power supply unit:-125mm X 68mm X168mm
  • Yes! I am InterestedRequest A Callback

    Aircon AC Controller 3AC

    Aircon AC Controller 3AC
    Get Best Quote
    Product Price: Rs 7,000 / UnitGet Best Price

    Product Details:
    Usage/ApplicationHVAC Systems
    Current10 A, 2 A, 1 A, 4 A, 5 A, 6 A
    BrandProton
    Phase1, 3
    Mounting TypePanel Mount, Screw Mount, Plug-In, DIN Rail Mount, Wall Mount
    • Supply Voltage:230 V AC, 50 Hz 15% separate phases for each A/C.
    • Contact Rating: 30 A at 230 V AC for Compressor Live Outputs & 5 A at 250V AC for Alarm Potential Free Outputs (C,N,O)
    • Temperature Sensor: Thermistor Sensor NTC 10K@25C Metal body with clamp Sensor Cable Length: 2.75 meters
    • Temperature Sensing Range: 0.0C to 55.0 C
    • Resolution: 1V for Voltage, 0.1 A for Current & 0.1C for temperature.
    • Indications: 
      1) Supply ON for A/C1 & A/C2, A/C3. Colour: Yellow
      2)OV/UV Fault Colour: Red
      3) Sensor Fail fault Colour: Red
      4) Room temperature High fault Colour: Red
      5) Healthy Colour: Green
      6) Keys: 4 key keypad for settings. 1] SET Key : To enter into FUNCTION SET Mode/To view the next set pt. 2] Up Arrow Key : To increment the set point 
      3] Down Arrow Key: To decrement the set point. 
      4] ENTER Key: To come out of FUNCTION SET mode/To enter into menu/To 
      accept the password 
      7) Mounting : Wall mounting
      8) Size : 245 mm (H) X 235 mm (W) X 67 mm (D
    • Mounting:Wall mounting
    Yes! I am InterestedRequest A Callback

    AC Protector .

    AC Protector .
    Get Best Quote
    Product Price: Rs 2,500 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Brochure

    Product Details:
    Voltage240V
    CurrentOutput contact rating for AC 25 A at 230 VAC
    BrandProton
    Usage/ApplicationAC ROOMS
    MaterialPLASTIC
    Country of OriginMade in India
    MODEL: ACC-45
  • System Supply : 230 VAC /- 15%
  • Output Contact Rating : Output contact rating for AC 25 A at 230 VAC
  • Power On Delay time : 1 minutes
  • Restart Delay time:3 minutes
  • Trip time delay : 3 sec for UV & OV , 5 sec. OL & 5 minutes for UL Low lube oil pressure Fire n alternator fault
  • Over voltage : Default 260 V .User settable by keys. 10 V hysteresis between Cutoff & Cut in. Auto reset
  • Under voltage : Default 180 V User settable by keys. 10 V hysteresis. Auto reset.
  • Over Load: Default 15 A. User settable by keys.
  • Under Load : Default 3 A user settable. Make it 0 A to bypass UL protection
  • ON Time :Default 60 min. User settable by keys
  • OFF Time: Default 30 min. User settable by keys
  • Indications:
    1.Healthy: Indicates controller is working healthy.
    2. ALARM : when this LED glows it indicates some fault is present.
    3 . AC : when this LED glows it shows AC is ON


  • Additional Information:

    • Production Capacity: 50 NOS
    • Delivery Time: 1 WEEK
    Yes! I am InterestedRequest A Callback

    EXPLORE MORE CATEGORIES

    © Proton Power Control Pvt. Ltd.. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.